As the weekend fades into the recesses of time, it leaves a reminder with me in the form of muscle failure from the screened in porch project. For regular readers (the half dozen or so)…you may recall me having posted in passing about the porch before. Well, enough was enough for me and I went full bore to finish the dang thing this weekend. I did (for the most part), but am paying the price today. The remaining false studs were put in place, and the panel trimming began in earnest. I never realized how tiring it can be to bend over a miter saw, hammer away (manually) at paneling with chincey nails that bend with the slightest off-center tap of a hammer, manually cut metal rebar for shelf hanging, finishing painting trim work around a counter, re-paint a contractor f***-up, rip paneling boards to exacting measurements, hang paneling boards with one hand while holding the paneling in place with shims and another hand all while running back and forth to Lowe’s every three or four hours. Starbucks saw almost as much money from me as Lowes did on this project!
It’s done though (for the most part – still a little trim work to do, and some cosmetic work here and there), and I’ve got a few shots to share of it.
After all was said and done, I retired to the couch for about half the day to surf, watch HGTv (that channel is addictive), and catch up on my photo reading materials. It was a pretty sweet feeling to get all of that completed. Speaking of sweet, check out the new softbox I made this evening from the DIY’er perspective. Should be interesting to see if it works when I get back in my “studio”. Here’s a shot of that too:
Not the most professional of softboxes, but it should do the job well enough, once I get the inside spray painted with white. (Without it the can itself cast a nasty yellow glare on shots.) For anyone who is thinking of doing this, all you need is an empty container, a piece of paper, a utility knife and a little spray paint. If you want to forgo the spray paint, you could always use something like a Clorox jug (empty and rinsed of course…) cut in half. Ultimately, I’ll likely put some cloth on there and rubber band it around to act as the softbox rather than a sheet of paper but you get the idea.
For more lighting ideas, try getting an empty cardboard roll from a carpet store – you can get them dirt cheap (as in free) and cut to size. Spray paint a little white paint on the inside and you’ve got yourself a neat little snoot! What’s a “snoot” you ask? Go find out at Strobist – where you will find everything you ever needed to know about lighting but were afraid to ask!